|
In the use of a small force to overcome a large one the lever finds its many common applications. The lever is used for prying, as in the case of the crowbar, or for lifting. For example, the fulcrum is the point upon which a crowbar rests when used to lift or to pry loose some object; the effort is applied at the end farther from the fulcrum and is relatively small. The distance from the operator's hands to the fulcrum is known as the lever arm, or effort arm; the object being pried loose is the resisting force, or resistance; the object's distance from the fulcrum is the resistance arm. Levers in which the fulcrum is located between the effort and the resistance, as in the crowbar and the beam balance, are known as first-class levers. The fulcrum may also be located at one end of the lever, with the effort applied at the other end and the resistance in between; this type of lever, illustrated by the wheelbarrow and the nutcracker, is known as a second-class lever. The final possibility, known as a third-class lever, has the effort applied between the fulcrum and the resistance and is illustrated by various types of tongs.
Many other common tools, instruments, and appliances are applications of the principle of the lever. The human forearm is an application of the third-class lever, the elbow acting as the fulcrum, the weight held in the hand and being lifted as the resistance, and the pull of the muscles between the elbow and the hand as the effort. In a second-class lever, the effort arm is always longer than the resistance arm, so that a smaller effort moves a larger resistance, while in a third-class lever the reverse is always true, with the effort greater than the resistance. In a first-class lever, the effort may be either larger or smaller than the resistance, depending upon the location of the fulcrum.
Sections in this article:
|
