|
A fission reactor consists basically of a mass of fissionable material usually encased in shielding and provided with devices to regulate the rate of fission and an exchange system to extract the heat energy produced. A reactor is so constructed that fission of atomic nuclei produces a self-sustaining nuclear chain reaction, in which the neutrons produced are able to split other nuclei. A chain reaction can be produced in a reactor by using uranium or plutonium in which the concentration of fissionable isotopes has been artificially increased. Even though the neutrons move at high velocities, the enriched fissionable isotope captures enough neutrons to make possible a self-sustaining chain reaction. In this type of reactor the neutrons carrying on the chain reaction are fast neutrons.
A chain reaction can also be accomplished in a reactor by employing a substance called a moderator to retard the neutrons so that they may be more easily captured by the fissionable atoms. The neutrons carrying on the chain reaction in this type of reactor are slow (or thermal) neutrons. Substances that can be used as moderators include graphite, beryllium, and heavy water (deuterium oxide). The moderator surrounds or is mixed with the fissionable fuel elements in the core of the reactor.
Types of Fission Reactors
A nuclear reactor is sometimes called an atomic pile because a reactor using graphite as a moderator consists of a pile of graphite blocks with rods of uranium fuel inserted into it. Reactors in which the uranium rods are immersed in a bath of heavy water are often referred to as "swimming-pool" reactors. Reactors of these types, in which discrete fuel elements are surrounded by a moderator, are called heterogeneous reactors. If the fissionable fuel elements are intimately mixed with a moderator, the system is called a homogeneous reactor (e.g., a reactor having a core of a liquid uranium compound dissolved in heavy water).
The breeder reactor is a special type used to produce more fissionable atoms than it consumes. It must first be primed with certain isotopes of uranium or plutonium that release more neutrons than are needed to continue the chain reaction at a constant rate. In an ordinary reactor, any surplus neutrons are absorbed in nonfissionable control rods made of a substance, such as boron or cadmium, that readily absorbs neutrons. In a breeder reactor, however, these surplus neutrons are used to transmute certain nonfissionable atoms into fissionable atoms. Thorium (Th-232) can be converted by neutron bombardment into fissionable U-233. Similarly, U-238, the most common isotope of uranium, can be converted by neutron bombardment into fissionable plutonium-23
|
